You have no items in your shopping cart.
Call Livetools
Email EnquiryOutside Diameter Roll Burnishing Tool
Replace Secondary Operations While Obtaining Superior Surface Finish
The outside diameter burnishing tool is used on turning machines to create extremely fine finishes in most ferrous and non-ferrous materials. The versatility of these tools allows the burnishing of external diameters, tapers, radii, and face as well as large internal bores.
A consistent, repeatable process that eliminates costly secondary operations.
The OD carbide roll burnishing tool can be used to burnish OD’s, at face surfaces, and shallow ID parts (Up to 25mm deep).
- Part Preparations: 100-120 RMS
- Feed Rate: 0.1mm/0.2mm
- Speed: 400-800 SFM (1,200 Max)
- Coolant Required: Water Soluble Or Oil
- Low Microinch Finish
- Work Hardening
- Easy To Use
- Proven Quality
- Lowers Cost
- Improves Processes
Advantages of OD Roll Burnishing
LOW MICROINCH FINISH
Produces a 4 to 8 Ra surface finish in one pass.
Improves surface irregularities and tool marks.
PROCESS IMPROVEMENTS
Burnishing is a repeatable and consistent process
Fast cycle times – measured in seconds, not minutes!
VERSATILITY
Burnishing is effective for many different part configurations.
Suitable process for a variety of metals – all ductile metals can be burnished!
LOW COST
Eliminates secondary machines and set ups.
Eliminates secondary processes such as grinding, honing and polishing.
Long lasting and replaceable wear parts reducing total cost over the life of the tool.
WORK HARDENING
Burnishing increases the surface hardness through the cold working process and compressive forces.
Increases metal’s resistance to fatigue and failure at stress points.
Produces a dense and uniform surface.
PROVEN QUALITY
The burnishing process has been refined and improved for over 100 years and has a proven record of success.
Monaghan Tooling Group and Elliott Tool Technologies continue this long tradition by providing the industry’s highest quality burnishing tools.