Pull Down Chucks

Pull Down Chucks

TSF-C

  • Size Range: 170mm – 650mm
  • Number of Jaws: 3 Jaws
  • Self Centering
  • Floating Jaws
  • Active Pull Down

TSF-C Pull Down Chucks are self centering with floating jaws (to clamp raw and easily deformed workpieces), and are designed for clamping workpieces with the highest demand for parallelism. TSF-C Chucks are proofline® sealed, which allows for long maintenance intervals and increased productivity. Their constant grip force ensures for consistent quality of workpieces.

Learn More

TSR-C

  • Size Range: 170mm – 650mm
  • Number of Jaws: 3 Jaws
  • Self Centering
  • Rigid Jaws
  • Active Pull Down

TSR-C Pull Down Chucks are self centering with rigid jaws (for precise clamping on pre-machined diameters), and are designed for clamping workpieces with the highest demand for parallelism. TSR-C Chucks are proofline® sealed, which allows for long maintenance intervals and increased productivity. Their constant grip force ensures for consistent quality of workpieces.

Learn More

TSF-C

  • Size Range: 170mm – 315mm
  • Number of Jaws: 2 Jaws
  • Self Centering
  • Floating Jaws
  • Active Pull Down

TSF-C Two Jaw Pull Down Chucks are self centering with floating jaws (to clamp raw and easily deformed workpieces), and are designed for clamping workpieces with the highest demand for parallelism. TSF-C Chucks are proofline® sealed, which allows for long maintenance intervals and increased productivity. Their constant grip force ensures for consistent quality of workpieces.

Learn More

TSF-RM

  • Size Range: 170mm – 530mm
  • Number of Jaws: 3 Jaws
  • Self Centering
  • Floating Jaws
  • Quick Jaw Change with Pallets

TSF-RM Pull Down Chucks feature quick jaw change via pallets for quick setup. They are self centering with floating jaws (to clamp raw and easily deformed workpieces), and are designed for clamping workpieces with the highest demand for parallelism. TSF-RM Chucks are proofline® sealed, which allows for long maintenance intervals and increased productivity. Their constant grip force ensures for consistent quality of workpieces.

Learn More

TSR-RM

  • Size Range: 170mm – 530mm
  • Number of Jaws: 3 Jaws
  • Self Centering
  • Rigid Jaws
  • Quick Jaw Change with Pallets

TSR-RM Pull Down Chucks feature quick jaw change via pallets for quick setup. They are self centering with rigid jaws (for precise clamping on pre-machined diameters), and are designed for clamping work pieces with the highest demand for parallelism. TSR-RM Chucks are proofline® sealed, which allows for long maintenance intervals and increased productivity. Their constant grip force ensures for consistent quality of work pieces.

Learn More

TSF-CP

  • Size Range: 170mm – 650mm
  • Number of Jaws: 3 Jaws
  • Compensating
  • Floating Jaws

The TSF-CP is designed for the clamping of shafts or parts where the referencing is not the OD of the part but a center or a centering diameter. A center point or a centering insert will center the workpiece and the jaws will clamp compensating and actively pull the workpiece down to the datum. The TSF-CP features floating base jaws.

Learn More

TSR-CP

  • Size Range: 170mm – 650mm
  • Number of Jaws: 3 Jaws
  • Compensating
  • Rigid Jaws

The TSR-CP is designed for the clamping of shafts or parts where the referencing is not the OD of the part but a center or a centering diameter. A center point or a centering insert will center the workpiece and the jaws will clamp compensating and actively pull the workpiece down to the datum. The TSR-CP features rigid base jaws.

Learn More

TSF-CP

  • Size Range: 170mm – 315mm
  • Number of Jaws: 2 Jaws
  • Compensating
  • Floating Jaws

The TSF-CP two jaw chuck is designed for the clamping of rectangular or irregular shaped shafts, or clamping of shafts or parts where the referencing is not the OD of the part but a center or a centering diameter. A center point or a centering insert will center the workpiece and the jaws will clamp compensating and actively pull the workpiece down to the datum. The TSF-CP features floating base jaws.

Learn More

FRC-N

  • Size Range: 215mm – 365mmm
  • Number of Jaws: 3 Jaws
  • Compensating
  • Rigid Jaws
  • Large Compensating Stroke

FRC-N Pull Down Chucks are designed for the compensating clamping of shafts between centers, where the clamping diameter is not concentric to the workpiece axis. The grip force of the chuck supplies the torque necessary to machine the workpiece and pulls it down to the axial datum (center point / axial stop). Due to its high rigidity against torsion, the chuck is ideal for turning as well as milling operations.

Learn More

FRS

  • Size Range: 215mm – 365mm
  • Number of Jaws: 3 Jaws
  • Self Centering
  • Rigid Jaws
  • Large Through Hole

FRS Pull Down Chucks are designed for the self centering clamping of flange or shaft type workpieces where the reference point is not a center but the OD of the workpiece. The through hole of the chuck allows it to swallow the workpiece if needed. Due it its high rigidity against torsion, the chuck can be used for milling as well as turning.

Learn More

TX-C

  • Size Range: 210mm – 530mm
  • Number of Jaws: 3 Jaws
  • Self Centering
  • Rigid Jaws
  • Centrifugal force compensation

TX-C Pull Down Chucks are designed for the self centering clamping of workpieces with the highest parallelism requirements. The constant grip force ensures consistent quality of the workpieces.

Learn More

TX-RV

  • Size Range: 8″” – 21″” (210mm – 530mm)
  • Number of Jaws: 3 Jaws
  • Self Centering
  • Rigid Jaws
  • Centrifugal force compensation

TX-RV Pull Down Chucks are designed for the self centering clamping of workpieces with the highest parallelism requirements. The constant grip force ensures consistent quality of the workpieces.

Learn More

TSBF-C

  • Floating Jaws
  • Size Range: 220mm-330mm
  • Number of Jaws: 3 jaws
  • Large Through-Hole

TSBR-C Open Center Pull Down Chucks are self centering with rigid jaws (for precise clamping on pre-machined diameters), and are designed for clamping workpieces with the highest demand for parallelism. TSBR-C Chucks are proofline® sealed, which allows for long maintenance intervals and increased productivity. Their constant grip force ensures for consistent quality of work pieces.

Learn More

TSBR-C

  • Floating Jaws
  • Size Range: 220mm-330mm
  • Number of Jaws: 3 jaws
  • Large Through-Hole

TSBR-C Open Center Pull Down Chucks are self centering with rigid jaws (for precise clamping on pre-machined diameters), and are designed for clamping workpieces with the highest demand for parallelism. TSBR-C Chucks are proofline® sealed, which allows for long maintenance intervals and increased productivity. Their constant grip force ensures for consistent quality of work pieces.

Learn More

TSBF-CP

  • Floating Jaws
  • Size Range: 220mm-330mm
  • Number of Jaws: 3 jaws
  • Large Through-Hole

TSBF-CP Open Center Pull Down Chucks are compensating with floating jaws and are designed for clamping workpieces with the highest demand for parallelism or perpendicularity. TSBF-C Chucks are proofline® sealed, which allows for long maintenance intervals and increased productivity. Their constant grip force ensures for consistent quality of workpieces.

Learn More

TSBR-CP

  • Floating Jaws
  • Size Range: 220mm-330mm
  • Number of Jaws: 3 jaws
  • Large Through-Hole

TSBR-CP Open Center Pull Down Chucks are compensating with rigid jaws and are designed for clamping workpieces with the highest demand for parallelism or perpendicularity. TSBR-CP Chucks are proofline® sealed, which allows for long maintenance intervals and increased productivity. Their constant grip force ensures for consistent quality of workpieces

Learn More

(0) Items
Items 0
Subtotal $0.00
To Top